LC-DB-1059
Contents
Product Name
WCHLINK burning replaces JLINK/STLINK ARM STM32 burner downloader emulator
About
The Elsay WCHLINK burning downloader uses the Qinheng USB microcontroller, which has fast burning speed, no firmware loss, and can debug and burn most ARM COTEX-M core microcontrollers. It also has virtual serial port function and can replace traditional downloaders such as CH340. Can better meet the R&D and debugging needs of electronic enthusiasts and developers
View
Front view
Side view
Reverse image
Introduction and Explanation
Size: 74mm * 24mm * 14mm/7g
Functional Features
- Output SWD interface, supporting mainstream software debugging and program downloading
- Support virtual serial port, can replace USB to TTL tools such as CH340/PL2303
- 3. Support Qinheng RISC - V kernel debugging
- Input voltage: 5V (USB power supply)
- Output voltage: 5V/3.3V
Instructions for use
Before powering on, short circuit the TX and GND pins to change the debugging mode
The constant blue light indicates ARM mode, and the constant blue light indicates RISC-V mode
The downloader supports virtual serial ports
After inserting the downloader, open the Device Manager and you will see a virtual serial port
Connect the downloader serial port to the target microcontroller, and then use the serial assistant to send and receive data
The downloader supports the SWD interface
1. Connect the SWD interface to the target microcontroller
2. In KEIL, click on the small hammer icon, select CMSIS-DAP in the DEBUG tool, and then click Settings
3. By default, the current SW interface. If the connection is successful, the ID of the target microcontroller will appear, and the program and simulation can be downloaded smoothly
Download User Manual
For more usage information, please refer toBaidu Netdisk Extraction code: fbyb