LC-PI-T113

From LCWIKI
Revision as of 11:56, 23 November 2023 by Melody (talk | contribs) (Created page with "=='''Product name'''== LC LCPI-PC-T113 is equipped with Allwinner T113 chip, Allwinner F133 is an intelligent control and display processor for automotive and industrial produ...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Product name

LC LCPI-PC-T113 is equipped with Allwinner T113 chip, Allwinner F133 is an intelligent control and display processor for automotive and industrial products



View of LCPI-T113

1.Front view of LCPI T113
T113-1.jpg

2.Reverse view of LCPI T113
T113-2.jpg



Overview

LC LCPI-PC-T113 is equipped with Allwinner T113 chip, Allwinner F133 is an intelligent control and display processor for automotive and industrial products
HiFi4 DSP
Memories
●Embedded with 128 MB DDR3, clock frequency up to 800 MHz
●Three SD/MMC host controller (SMHC) interfaces: SD3.0/SDIO3.0/eMMC5.0

Video Engine
●H.265/H.264/MPEG-1/MPEG-2/MPEG-4/JPEG/VC1/Xvid/Sorenson Spark decoding, up to 1080p@60fps
●JPEG/MJPEG encoding, up to 1080p@60fps

Video and Graphics
●Allwinner SmartColor2.0 post processing for an excellent display experience
●Supports de-interlacer (DI) up to 1080p@60fps
●Supports Graphic 2D (G2D) hardware accelerator including rotate, mixer, LBC decompression functions

Video Output
●RGB interface up to 1920 x 1080@60fps
●Dual link LVDS interface up to 1920 x 1080@60fps
●4-lane MIPI DSI up to 1920 x 1200@60fps
●CVBS OUT interface, supporting NTSC and PAL format

Video Input
●8-bit digital camera interface
●CVBS IN interface, supporting NTSC and PAL format

Analog Audio Codec
●2 DACs and 3 ADCs
●Analog audio interfaces: HPOUTL/R, MICIN3P/N, LINEINL/R, FMINL/R
Two I2S/PCM external interfaces (I2S1, I2S2)
Maximum 8 digital PDM microphones (DMIC)



Introduction

1.Introduce for interface
T113-3-1.jpg

2.Board size:85*55mm Weight:20g
T113-4-1.jpg

T113-5.png

T113-6.png



Instruction for test

1.Program burning
(1)Open the burning software and insert the TF card
T113-7.png

(2)Select Firmware Burn
T113-8.png


2.Function test
Insert a card, connect using a serial port, and enter the system
T113-9.jpg

The system has started and the screen is displaying normally
T113-1.jpg

480 * 272 LCD display screen: used to display relevant debugging information/human-machine interaction
T113-10.jpg

USB to TTL serial port module, when using the serial port debugging function, a USB to TTL module and a Dupont cable are required to connect the development board and the computer
LCPIH3-16.jpg LCPIH3-17.jpg

Select a serial COM port with a baud rate of 115200
T113-11.png

Press Enter to enter interactive mode
T113-12.png


3.WIFI wireless network
Start the wireless network card
ifconfig wlan0 up
Modify and copy the following code to configure wifi account and password
T113-13.png

connect to wireless network
wpa_supplicant -i wlan0 -c /etc/wpa_supplicant.conf -B
Configure DHCP to automatically assign IP
udhcpc -i wlan0
Check if the connection is successful
T113-14.png



System compilation instructions

This compressed package contains the files required for compilation, which can be compiled by executing the command. It eliminates the trouble of network failure and slow speed when downloading, and it is easier to compile the firmware.
Download and unzip Ubuntu_16.04_X64_TINA-2023-05-08(F133_T113).zip
T113-15.png

Click "File" "Open" in VMware and select Ubuntu_16.04_X64.vmx in the decompressed path.
T113-16.png

The virtual machine will be added in VMware, click "开启此虚拟机"
T113-17.png

After the virtual machine enters the login interface, the account number is Test and the password is 123456.
T113-18.png

Open the file manager, go to the "LC" folder, go to the "Tina-Linux" folder.
T113-19.png

Double-click "README.md" to view the contents of the help manual. Since the compressed package has already been configured with relevant files, there is no need to download it again. Just enter the instructions directly to compile.
T113-20.png

Right-click "Open in Terminal" and enter the following commands in sequence
T113-21.png

T113-22.png

Sometimes you need to select a configuration during the compilation process, just press Y and press Enter.
T113-23.png

T113-24.png

After all instructions are entered, an img file will be generated, which can be dragged to the Windows desktop for programming.
T113-25.png



Download LCPI-T113 User Manual

For more information about the use of LCPI-T113, please clickGoogle Drive Link