LC-BT-5-1

From LCWIKI
Revision as of 10:08, 25 November 2023 by Melody (talk | contribs) (Connection instructions)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Product name

1-way Bluetooth 5.0 relay BLE Bluetooth Bluetooth networking MESH networking Mobile APP remote control switch JDY-24M



Overview

LC 1-way BLE Bluetooth relay module is equipped with the JDY-24M module, which can send instructions through the mobile APP to control the switch of the relay. The module also has 1 channel button onboard. The module can be networked and has powerful functions.
LC-BT-5-1-1.png



Features

  • Onboard JDY-24M Bluetooth BLE5.0 module
  • Official information provides Bluetooth relay control APP, which can also be downloaded from the App Store
  • Control distance: 80M (open environment)
  • Working voltage: DC7-80V/5V
  • Onboard 1-way 5V, 10A/250V AC 10A/30V DC relay, which can be continuously activated 100,000 times, has diode overflow protection and short response time
  • Onboard Bluetooth status indicator and relay indicator
  • Reserved UART debugging interface, which can be connected to MCU for transparent transmission
  • Support Bluetooth MESH (networking serial port data communication, output IO control, input button control) networking



Interface Description

7-80V、GND、5V DC 7-80V power supply or DC 5V power supply
NO1/2 Normally open end
NC1/2 Normally closed end
COM1/2 Publice end
D13 Power Indicator
D15 Bluetooth connection indicator light
D1 Relay switch indicator light



Connection instructions

1.Connect the power supply: The module is connected to a 7-80V power supply or a 5V power supply.
2.Download and install "BLE Debugging Treasure"; search for "BLE Debugging Treasure" in major Android application markets and install it.
LC-BT-5-1-2.png LC-BT-5-1-3.png

3.After opening the "BLE Debugging Treasure" APP, it will automatically search for the module, select "JDY-24M" and connect; after the connection is successful, the blue light will change from slow flashing to solid light, click unknown service and then select the UUID of 0000ffe2, and light up the next two icon; enter the code below and click Send to control;
LC-BT-5-1-4.png LC-BT-5-1-5.png