LC-WF-5-2
Contents
Product name
ESP8266 ESP-01/01S dual-channel WIFI relay module
About LC-WF-5-2
This module uses ESP-01/ESP-01S as a WIFI module control, which can be controlled through a mobile phone and can be used in DIY smart homes. No configuration required, ready to use, simple and convenient to use
LC-WF-5-2 view
Front view
Reverse view
Introduction instructions
Board size：50.7*32.1mm/30g
Hardware introduction
Function features
- Module working voltage: DC5V
- low level control
- With relay indicator light and reset button
- Onboard 5V, 10A/250V AC 10A/30V DC relay, which can be continuously actuation 100,000 times
- In an open environment, the mobile phone is equipped with a WIFI module, and the maximum stable transmission distance after power-on is 100m.
Use description
1. Insert the ESP-01 module into the 2*4Pin header
2. Connect the DC5V power supply to the IN+ and IN- interfaces.
3. Connect the mobile phone to the AP hotspot signal "ESP8266-WIFI" emitted by the ESP-01 module
4. Open the browser and enter the IP address 192.168.4.1 to control the relay to actuation and release.
Download LC-WF-5-2 user manual
For more information about the use of LC-WF-5-2, please view the Baidu network disk extraction code: u66a
