LC-EM-1314
Contents
Product Name
LC USB2.0 HUB 1-to-4 Hub Module USB2.0-480Mbps High speed Transmission Equipped with LED Indicator, Board mounted Fuse, Overcurrent Protection, PH2.0 Horizontal Surface mount Terminal
About
The USB2.0HUB_1 to 4 hub module is developed based on the FE1.1s chip, which can expand one USB interface into four USB interfaces.
It has a 5V DC input and supports USB high-speed 480Mbps. It comes with LED indicator lights, a 500mA fuse on the input end board,
and a 2A fuse on the output end USB interface board. It has the characteristics of overcurrent protection, high performance, low power consumption, and low cost.
View
Front view
Side view
Reverse image
Introduction and Explanation
Size: 30.2 * 65mm/12g
1. Input port: 2.0mm horizontal surface mount terminal
2. Fuse: Input terminal is 500mA, output terminal is 4-channel 2A fuse
3. 4 output ports
4. Power indicator light+4-channel USB indicator light
5. USB conversion chip: FE1.1S
Functional Features
- Support USB interface expansion from one to four
- Supports USB 2.0 with a transfer speed of up to 480Mbps
- Comes with power indicator light and four-way USB signal indicator light
- Onboard input/output fuse, supporting overcurrent protection
Instructions for use
1. Install USB drivers on the computer
2. Connect the input end to the computer's USB port, and connect any USB device to the output end. At this time, the LED power indicator and USB signal indicator will light up
3. At this point, open the USB device viewer or the built-in device manager on the computer, which will display the information of the USB device and the corresponding COM port
User Manual Download
For more product information, please refer toBaidu Cloud Drive Extraction code: fesb
