LC-MK-GPSCLK
Product name
BDS GPS digital tube code table car and truck speeding alarm prompt clock temperature and humidity speed display cycling code table
LC-MK-GPSCLK view
Front view
Reverse view
Overview
The GPS digital tube computer supports displaying three parameters: time, temperature and humidity, and current vehicle speed. The time can be automatically adjusted by GPS or manually set, and supports 12-hour and 24-hour formats. The temperature and humidity parameters can be set to display only temperature and humidity, and the display of temperature and humidity will be automatically switched. GPS automatically measures the current vehicle speed, and an overspeed alarm can be set.
Function features
1.GPS automatic time calibration, GPS measurement of vehicle speed
2.Temperature and humidity display function
3.Speeding alarm
4.Support type-c line charging treasure power supply
5.Size:71.4*25.6mm,105g
Use description
There are 3 functions, display time, display temperature and humidity, display speed
Note: Due to the different voltages, it is not possible to plug in the type-c power cord while connecting the battery.
After power on, it will enter the time display page by default. If the GPS does not receive a signal, the time will display 00:00. Take it outside, after receiving the GPS signal, the horn will make a sound, and automatically adjust the time.
On the clock display page, press the S2 key to switch to the temperature and humidity display interface. By default, the digital tube displays temperature and humidity in turn every 5 seconds. Press the S3 key to return to the clock display interface.
On the temperature and humidity display page, press the S2 key to switch to the speed display interface. If the GPS does not receive a signal, the speed will display 000. You need to connect to the GPS outdoors to see the moving speed. Press the S3 key to return to the temperature and humidity display interface.
Function setting:
| Time display | Temperature and humidity display | Speed display |
| Time format settings | Temperature or humidity display | Speed limit setting |
| 12H or 24H | C temperature H humidity AUTO switch | 0~200km/h |
| Time setting | Brightness setting | Buzzer setting |
| Hour+1 Minute+1 |
8 levels of brightness | BEE open OFF closed |
On the clock display interface, press and hold the S1 button for 2 seconds to enter the time format setting. You can press S2 or S3 to switch the time format, supporting 12-hour and 24-hour format. Press and hold the S1 button again for 2 seconds to enter the time setting. Press S3, hour +1, press S2, minute +1. You can also not set it here, and the GPS will automatically adjust the time. Press and hold the S1 button again for 2 seconds to return to the time display.
On the temperature and humidity display interface, press and hold the S1 button for 2 seconds to enter the temperature and humidity display settings. Press S2 or S3 to switch the display content, C means only temperature is displayed, H means only humidity is displayed, AUTO means temperature and humidity are displayed in turn. (default is AUTO). Press and hold the S1 button again for 2 seconds to enter the brightness setting of the digital tube. There are 8 levels of brightness display, press the S2 or S3 key to display the brightness level. Press and hold the S1 button again for 2 seconds to return to the temperature and humidity display interface.
On the speed display interface, press and hold the S1 button for 2 seconds to enter the speed limit setting. The default speed limit value is 120, which can be adjusted by pressing the S2 or S3 key. If the speed limit value is exceeded, the buzzer will "didi" alarm. Press and hold the S1 button again for 2 seconds to enter the buzzer setting. Press S2 or S3 to adjust, display "BEE" means the buzzer is on, and display "OFF" means the buzzer is off. Press and hold the S1 button again for 2 seconds to return to the speed display interface.
All modified parameters will be saved automatically, and will be used automatically when power on next time.
