LC-PI-F133/D1S
Contents
Product name
LC LCPI-PC-F133 is equipped with Allwinner's F133 chip, which is a high-performance decoding screen display processor.
Overview
Integrated RISC instruction architecture 64-bit processor LCPI-PC-F133
Support H.265 up to 1080p@60fp decoding and G2D rotation
Supports RGB/LVDS/MIPI mainstream interfaces with screen resolution up to 1920x1080@60fps
Support simultaneous display output of screen and analog video signals
CPU
• RISC CPU
• 32 KB I-cache + 32 KB D-cache
Memory
• SIP 64 MB DDR2
• SD3.0/eMMC 5.1, SPI Nor/NAND Flash
Video Engine
• Video decoding
- H.265 up to 1080p@60fps
- H.264 up to 1080p@60fps
- MPEG-1/2/4, JPEG, VC1 up to 1080p@60fps
• Video encoding
- JPEG/MJPEG up to 1080p@60fps -Supports input picture scaler up/down
Display Engine
• Allwinner SmartColor2.0 post processing for an excellent display experience
• Supports de-interlace (DI) up to 1080p@60fps
• Supports G2D hardware accelerator including rotate, mixer, lbc decompression functions
Video OUT
• CVBS OUT interface, supporting NTSC and PAL format
• RGB LCD output interface up to 1920 x 1080@60fps
• Dual link LVDS interface up to 1920 x 1080@60fps
Video IN
• 8-bit parallel CSI interface
• CVBS IN interface, supporting NTSC and PAL format (only for F133-B)
System compilation instructions
This compressed package contains the files required for compilation, which can be compiled by executing the command. It eliminates the trouble of network failure and slow speed when downloading, and it is easier to compile the firmware.
Download and unzip Ubuntu_16.04_X64_TINA-2023-05-08(F133_T113).zip
Click "文件" "打开" in VMware and select Ubuntu_16.04_X64.vmx in the decompressed path.
The virtual machine will be added in VMware, click "Open this virtual machine"
After the virtual machine enters the login interface, the account number is Test and the password is 123456.
Open the file manager, go to the "LC" folder, go to the "Tina-Linux" folder.
Double-click "README.md" to view the contents of the help manual. Since the compressed package has already been configured with relevant files, there is no need to download it again. Just enter the instructions directly to compile.
Right-click "Open in Terminal" and enter the following commands in sequence
Sometimes you need to select a configuration during the compilation process, just press Y and press Enter.
After all instructions are entered, an img file will be generated, which can be dragged to the Windows desktop for programming.
Download LCPI-F133/D1S user manual
For more information on the use of LCPI-F133/D1S, please clickGoogle Drive Link
