LC-NW-8-2
Contents
Product Name
USB to CAN module (ADM3053 isolated version) CAN bus debugging assistant CAN bus analyzer
Overview
The LC CANABLE-P USB to CAN module is ported from an open-source project
CAN bus protocol analysis can be conducted using the open-source upper computer Cangaroo
LC-NW-8-2 View
Introduction and Explanation
Board size: 75.5mm * 18.5mm/15g
Functional Features
1. Support open-source Cangaroo CAN protocol analysis software
2. Adopt CAN isolation chip ADM30532500V isolation, 1M baud rate
3. Three color LED status indicator
4. Input voltage: 5V (USB power supply)
Instructions for use
The RES jumper cap is inserted, indicating the connection of a 120 Ω terminal resistor. If not needed, the jumper cap can be removed
Connect CAN-H and CAN_L to the CAN bus, AGND can be connected or not
Inserting the computer, CAN devices will appear in the device manager
Open the upper computer
Select the desired baud rate and sampling point, click OK, and the onboard tri color light will light up
Can send and receive data on the CAN bus
Download User Manual
For more information on the use of this product, please refer toBaidu Netdisk Extraction code: 0ho5