LC-NW-8-2

Product Name

USB to CAN module (ADM3053 isolated version) CAN bus debugging assistant CAN bus analyzer

Overview

The LC CANABLE-P USB to CAN module is ported from an open-source project
CAN bus protocol analysis can be conducted using the open-source upper computer Cangaroo

LC-NW-8-2 View

Front view:

Reverse image:

Introduction and Explanation

Board size: 75.5mm * 18.5mm/15g

Functional Features

1. Support open-source Cangaroo CAN protocol analysis software
2. Adopt CAN isolation chip ADM30532500V isolation, 1M baud rate
3. Three color LED status indicator
4. Input voltage: 5V (USB power supply)

Instructions for use

The RES jumper cap is inserted, indicating the connection of a 120 Ω terminal resistor. If not needed, the jumper cap can be removed
Connect CAN-H and CAN_L to the CAN bus, AGND can be connected or not
Inserting the computer, CAN devices will appear in the device manager

Open the upper computer

Select the desired baud rate and sampling point, click OK, and the onboard tri color light will light up

Can send and receive data on the CAN bus