LC-EM-1299

Product Name

Openlog data logger flight control board FLASH serial port data storage/black box Atmega328P Arduino

About

This product is a data logger that can record data on a memory card through the UART universal serial port. This function is similar to a black box,
which records the data sent by the main device to the serial port and saves the data in text form on the memory card
Can be used for flight control boards with cleanflight firmware, connected to the corresponding serial port,
and through the settings of the upper computer software cleanflight configurator,
important operational data of the drone can be recorded on the memory card. And use the Blackbox flight data recorder software to replay and analyze the flight records

View

Front view

Side view

Reverse image

Introduction and Explanation

Structural dimensions

Size: 20.32mm * 20.32mm/2 g

Functional Features

• Atmega328P chip, supporting Arduino development

• Introduce burning IO, program can be burned by oneself

• Simply connect to the serial port to use (the serial port is only compatible with 3.3V, 5V requires external level conversion)

• Working voltage: 3.3~5V Working current MAX6mA

• Support memory: FAT16/FAT32 up to 64GB

• Baud rate: Supports 2400 4800 9600 19200 38400 57600 115200

Instructions for use

GND, MOSI, MISO, SCK, 3V3, RST are used for firmware burning. Please refer to the burning instruction document for instructions on how to use them

GND, RXD, TXD, 5V are used to connect to the serial port. The RXD and TXD levels can only be 3.3V. 5V power supply supports 3.3-5V

Green light on: indicates that a serial port connection has been established

Blue light on: indicates that TF card initialization is complete

Default baud rate 9600

The written data can be viewed through the TF card reader

Data Sheet · SparkFun/OpenLog Wiki · GitHub

Download User Manual

For more information on the use of this product, please refer toBaidu Cloud Drive Extraction code: xfv9